W3 Wireless Receiver Archives — Audioengine Skip to Content

Make the transition to a wireless system across the board.

So you’ve decided to integrate wireless speakers into your home or office… Awesome! Wireless speakers provide convenience and mobility without sacrificing sound quality.

When it comes to setting it up, though, you might be concerned as to whether or not all of your devices will connect seamlessly with your new speakers. Luckily, Audioengine’s wireless speakers are pretty user-friendly and can be connected to various types of devices.

For most mobile applications, such as streaming music from your smartphone or tablet, connecting to your speaker system is a simple matter of going into your device’s Bluetooth settings and connecting to the proper device. From there, your device will be able to reconnect with the wireless speakers at any time.

TVs and desktop computers can be a bit more complicated in terms of avoiding the usage of pesky wires and cables, which you probably wanted to eliminate when you opted to buy wireless speakers in the first place; however, there are a few options to make setting up your system easier, such as using wireless adapters with your sources. Wireless adapters, such as our W3 Wireless Adapter and D2 24-bit Wireless DAC, enable wireless connectivity in devices not previously built for wireless connections. You can still make use of those cables, of course, if you are uninterested in purchasing additional pieces for your audio system; since our wireless speakers feature analog inputs, they can easily be connected to them by simply connecting their line level outputs to the input of these speakers..

Our technology

Audioengine's wireless speaker systems and adapters make it possible for you to tune in from almost any device. Most of our products can also connect to multiple different types of brands or sources, so whether you prefer iPhones, iPads, or even Android devices, we have the wireless system components that will best accommodate you and your lifestyle.

DAC type
Dual mode USB and analog (via CS5343 ADC) wireless DAC

Inputs
USB audio, mini-jack analog

Outputs
analog mini-jack

DAC
CS4344

ADC
CS5343

Full scale output
1.0Vrms

Output impedance
470 ohms

Power source
Sender: USB from computer or adapter
Receiver: USB power adapter

Power requirements
Sender: 180mA, 5V
Receiver: 150mA, 5V

SNR
95dB

THD+N
0.01%

Crosstalk
-65dB

Frequency response
20Hz to 20KHz, +/- .2dB

Input bit depth
up to 16 bits native

Input sample rate
up to 48KHz native

USB device class
type 1.1 or above

Wireless operation range
Up to 100ft (30m) typical

Latency
<20ms

Receivers supported
up to 3

Product dimensions
100x30x10mm (LxWxH)

Shipping weight
1 lb

Included accessories
minijack cable (20″), minijack to RCA adapter (12″), USB power adapter

Environmental
Operating Temperature: 32 to 95 degrees F
Non-operating Temp: -4 to 113 degrees F
Relative Humidity: 5% to 95% non-condensing

Advantages of wireless
The W3 wireless system transmits bit-perfect PCM-stereo simultaneously to up to 3 receivers. Because the USB controller in the Sender and the DAC in the Receiver are segregated by the wireless subsystem, various anomalies which plague many wired DACs such as jitter, grounding, and induced cable noise are greatly reduced. In addition, the W3 allows the user to physically isolate a potentially noisy computer from the sensitive audio components in your system.

W3 USB
The W3 utilizes the TI CC8520 PurePath™ USB wireless system-on-a-chip solutions, TI’s newest offering to the wireless audio arena. The Sender can be powered directly from the USB bus or from the included external power adapter.

W3 DAC
The W3 Receiver utilizes the CS4344 DAC, a solid, well regarded industry mainstay. Due to the CS4344’s’s high signal-to-noise specs, the W3 presents impressive low noise and low distortion characteristics.

Audioengine operates two websites, audioengine.com and audioengineeu.com. If you go to any other site but these, they are not an Audioengine site. For Canada, Mexico and most of Europe and the UK, we only sell through Amazon. There are also a host of authorized retailers and sites across the US, and they can be found here. For international sales, we have distributors that operate independently, and they can be found here. 

What happens if I buy from an authorized site claiming to be Audioengine? Unfortunately, there is not much we can do. We are taking all the action we can to make sure those sites don't get indexed, but we recommend you work with the provider of the card you used to make payment to get your money back.

Step-by-Step Guide

  1. Open Terminal:
    • You can find Terminal in your Applications folder under Utilities, or you can use Spotlight by pressing Cmd + Space and typing "Terminal".
  2. Execute the Command:
    • In the Terminal window, type the following command and press Enter:

bash

Copy code

sudo pkill bluetoothd

  1. Enter Your Password:
    • After pressing Enter, you will be prompted to enter your password. Type your Mac's administrator password and press Enter.
    • Note that when you type your password, it won't be displayed on the screen (not even as asterisks). Just type it and press Enter.

By following these steps, you should be able to reset your Bluetooth service on your Mac, which can help resolve connectivity issues with your Audioengine devices or any other Bluetooth peripherals.

We take great pride in our products, and go through great lengths to ensure consistency and quality. For that reason, this item was randomly selected for an additional step of Quality Assurance.

No, there are no firmware updates or special drivers needed unless you own our A1-MR multi-room speakers or our B-Fi multi-room wireless streaming device.

If a firmware update is released for the A1-MR or the B-Fi, you will be notified of the update the next time you open the Audioengine Control App.  If an update is needed, simply click "update" on the DEVICES page next to the product that needs to have the firmware update applied.  The app will handle the rest of the process from there!

Standard plug-n-play drivers that are provided by your computer's OS are utilized when using the USB input on our A2+, HD3, and HD4 speaker models.

And all of our Bluetooth speakers/products are compatible with any device that supports Bluetooth, and the A2DP profile for streaming stereo audio. This includes most smartphones, tablets, and computers. For computers that don't include Bluetooth support out of the box, you can simply add a USB Bluetooth adapter.

Yes, connect the W3 Sender to the line-leve outputs or headphone jack of the TV and the Receiver. You'll need a second USB power adapter or iPod charger for this application. These power supplies are inexpensive and can be found at your local Radio Shack or electronics store.

The W3 is a great way to make your S8 subwoofer wireless!

The W3 kit comes with a sender unit and receiver unit.  For use with an AV Receiver or Stereo Amplifier, you'll need to connect the sender unit to the SUB or LFE output of your AV receiver.  This is usually done with a 3.5mm stereo-mini to RCA "Y" cable.  You can connect either RCA to the SUB / LEF out, and just leave the other side unplugged.  Then, you'll connect the W3 receiver to your S8 Powered Subwoofer, using a 3.5mm stereo mini to RCA "Y" cable, normally.  If you're using a different sub that only has a single RCA, connect the same color RCA that you used for your AV Receivers SUB / LFE out, and leave the other unplugged.  Both W3s will need power.  In this configuration you will need a USB AC adapter for each W3 unit.

You can also do this using powered speakers like our A5+s, A2+s, HD6s, or HD3s, instead of an AV Receiver.  For this, you'll connect the W3 sender to the RCA output on the left speaker, using a 3.5mm stereo-mini to RCA "Y" cable.  Then connect the W3 Receiver to the input on your S8.  You can either use a 3.5mm stereo-mini to stereo-mini cable for this, or another 3.5mm stereo-mini to RCA "Y" cable; either will work fine.  Both W3 units will need to be powered from a USB port.  You can use USB AC power adapters, or if the powered speaker you're using is an A5+, you can use the USB port on it's rear panel for the W3 sender.

The USB connector on the Sender transmits USB audio from your computer OR you can plug any input into the audio connector on the other end (an iPod, stereo, etc.). The Receiver part is powered by a USB power supply or charger and sends out analog audio. Just keep in mind the W3 will work anywhere you want to replace an RCA cable or 1/8" mini-jack cable with wireless! If i purchase multiple W3 sets will they interfere with each other when used in the same setup? Up to 8 W3 sender receiver pairs will play well together as long as you keep a minimum of 6 inches between each unit.

Yes, you can control iTunes with your iPhone and then send music from your Mac or PC out to your stereo system with the W3. Think of the W3 as an inexpensive way to get really high-quality wireless audio anywhere around the house. And no need to buy new gear as you can connect the W3 to all of your existing audio components.

The W3 will easily handle low frequencies and is designed to transfer all music without any compression of loss. If I have the W3 can I send audio to my passive rear channel surround speakers? Sure, as long as you have a power amplifier to power your passive speakers, the W3 will work.

The W3 replaces any "line-level" RCA or mini-jack audio cable but is not designed to connect directly to powered speaker outputs.

Absolutely! Many of our customers use the W3 with their MP3 players, stereo receivers, CD players, powered speakers, satellite radios, etc. The W3 Sender and Receiver units connect to any gear that has an audio input and output (or headphone jack).