N22 Desktop Audio Amplifier Archives — Audioengine Skip to Content

Type
Compact Integrated Stereo Amplifier

Rated Power Output: 22W RMS per channel at 4 ohms (measured in compliance with 16 C.F.R. § 432.3)
Peak Power Output: 100W per channel at 4 ohms (AES)

Amplifier type
Dual Class D TDA 7492 amplifier

Input voltages
110-240V, 50/60Hz auto-switching

Inputs
RCA and 1/8″ (3.5mm) mini-jack
USB-C

Outputs
RCA variable preamp

Speaker outputs
5-way binding posts

SNR
>95dB A-weighted

THD+N
<0.02% at all power settings

Crosstalk
-50dB

Frequency response
20Hz-22kHz ±1dB

Input impedance
10K ohms unbalanced

Input sensitivity
410mV (@max volume)

Protection
Output current limiting, thermal over-temperature, power on/off transient protection

Headphone amplifier
Burr-Brown/TI OPA2134

Dimensions
7″(H) x 2.75″(W) x 5.5″(D)

Weight
3.55 lbs (1.6kg)

Shipping weight
5.0 lbs (4.6kg)

Shipping box dims
11.5″(H) x 7.5″(W) x 9.5″(D)

Finish
Satin Black

Upstanding design
The vertical design of the N22 with its integrated stand allows the 22 watt/per channel stereo class D TDA 7492 amplifier to run cool through passive convection without a fan or massive heatsink. The N22 fits easily on your desk and doesn’t take up much space.

Discrete headphone amplifier
For headphone enthusiasts the N22 includes a high-performance, low-noise discrete amplifier which works well with all types of headphones and earphones.

Variable line out
The N22 includes a variable preamp output so you can connect a subwoofer, external amplifier, or Audioengine wireless adapter and control the volume of the line-out from the front panel.

Simple operation
Both audio inputs on the N22 are active so two audio sources may be connected to the amplifier at the same time without the need for an input switch. A standby idle mode is also included to conserve power when you’re not playing music.

Wireless rear speakers
Use the N22 amp, Audioengine P4 passive speakers, and our W3 wireless adapter for a low-cost but great-sounding wireless rear channel setup for your home theater.

If you are experiencing issues with your speakers when connected via USB on a Windows 10+ operating system, it might be due to the DCH (Declarative, Componentized, Hardware Support Apps) drivers. While DCH drivers offer many benefits, they can sometimes cause compatibility issues with USB audio devices, resulting in problems such as delays when sound starts, poor audio quality, or the speakers not being recognized properly.

Solution: To resolve these issues, we recommend switching from DCH drivers to non-DCH (standard) drivers. Here’s a step-by-step guide to help you do that:

  1. Uninstall the Current DCH Drivers:
    • Open the Device Manager on your PC.
    • Locate your audio device under "Sound, video, and game controllers."
    • Right-click on the device and select "Uninstall device."
    • Ensure you check the option to delete the driver software for this device to completely remove the DCH drivers.
  2. Download the Non-DCH Drivers:
    • Visit the support website of your motherboard or computer manufacturer.
    • Navigate to the driver download section and find the non-DCH Realtek (or appropriate) audio drivers for your system.
  3. Install the Non-DCH Drivers:
    • Download and run the installer for the non-DCH drivers.
    • Follow the on-screen instructions to complete the installation process.
  4. Restart Your PC:
    • After installing the non-DCH drivers, restart your computer to apply the changes.

By switching to non-DCH drivers, the compatibility issues with your USB speakers should be resolved, allowing you to enjoy optimal audio performance.

Additional Tips

  • Check for Firmware Updates: Ensure your speakers have the latest firmware installed. Visit the manufacturer’s website for firmware updates that may improve compatibility and performance.
  • USB Ports: Try connecting your speakers to a different USB port to see if the issue persists.
  • Contact Support: If you continue to experience issues, please contact our customer support team. Provide details about your operating system, motherboard model, and the specific problems you are encountering.

We hope this helps you resolve any issues and enhances your experience with our speakers. If you have further questions or need assistance, don’t hesitate to reach out to our support team.

Audioengine operates two websites, audioengine.com and audioengineeu.com. If you go to any other site but these, they are not an Audioengine site. For Canada, Mexico and most of Europe and the UK, we only sell through Amazon. There are also a host of authorized retailers and sites across the US, and they can be found here. For international sales, we have distributors that operate independently, and they can be found here. 

What happens if I buy from an authorized site claiming to be Audioengine? Unfortunately, there is not much we can do. We are taking all the action we can to make sure those sites don't get indexed, but we recommend you work with the provider of the card you used to make payment to get your money back.

Step-by-Step Guide

  1. Open Terminal:
    • You can find Terminal in your Applications folder under Utilities, or you can use Spotlight by pressing Cmd + Space and typing "Terminal".
  2. Execute the Command:
    • In the Terminal window, type the following command and press Enter:

bash

Copy code

sudo pkill bluetoothd

  1. Enter Your Password:
    • After pressing Enter, you will be prompted to enter your password. Type your Mac's administrator password and press Enter.
    • Note that when you type your password, it won't be displayed on the screen (not even as asterisks). Just type it and press Enter.

By following these steps, you should be able to reset your Bluetooth service on your Mac, which can help resolve connectivity issues with your Audioengine devices or any other Bluetooth peripherals.

Make sure to maximize your audio source volume/s connected to the N22 and lower the N22 volume dial to minimize naturally occurring noise floor that can come thru the speakers when amplifiers are turned up high. 

We take great pride in our products, and go through great lengths to ensure consistency and quality. For that reason, this item was randomly selected for an additional step of Quality Assurance.

No, there are no firmware updates or special drivers needed unless you own our A1-MR multi-room speakers or our B-Fi multi-room wireless streaming device.

If a firmware update is released for the A1-MR or the B-Fi, you will be notified of the update the next time you open the Audioengine Control App.  If an update is needed, simply click "update" on the DEVICES page next to the product that needs to have the firmware update applied.  The app will handle the rest of the process from there!

Standard plug-n-play drivers that are provided by your computer's OS are utilized when using the USB input on our A2+, HD3, and HD4 speaker models.

And all of our Bluetooth speakers/products are compatible with any device that supports Bluetooth, and the A2DP profile for streaming stereo audio. This includes most smartphones, tablets, and computers. For computers that don't include Bluetooth support out of the box, you can simply add a USB Bluetooth adapter.

On the A2+ Wireless/HD3 models with an external power supply brick, first test it by plugging into wall power and observing the LED light on the brick to see if its solid, blinking, out. If it's blinking or out, the power supply is likely faulty.

If the light is solid, proceed to plugging into the speaker and observe the power supply brick LED once more. If it's blinking or out, there is likely an issue with the internal amp. Contact support if either has an issue.

This is actually normal behavior. It's is a tradeoff of using an analog potentiometer for the N22. Analog potentiometers are tactile, and don't require a microprocessor like a digital encoder would, but they sometimes do have some volume imbalance at lower levels.  An easy solution for this is to raise the volume of your N22, and lower the volume at your source device.

Yes, plugging in headphones will bypass the speaker output so audio will play through your headphones only.

The N22 needs to be kept upright with the stand attached for proper cooling.

Yes, the N22 uses an external switching power supply so it will automatically convert to a different voltage when plugged in. The power cable is also detachable which makes it convenient to replace the AC plug with a different type if you don't want to use an adapter plug.

Yes, the N22 amp + P4 passive speakers + W1 or W3 wireless stereo adapter will make a great-sounding wireless rear channel setup.