B2 Quick Setup
Step 1: Connect the Bluetooth antenna to the B2 rear panel. The B2 will not function without the antenna connected.
Step 2: Connect the power cable to the b2 rear panel and plug the power cable into an AC outlet.
Step 3: Turn on the B2 power switch, which is located on the rear panel. B2 will automatically go into pair mode and the Pair button on the B2 rear panel should be flashing.
Step 4: On your device, turn on Bluetooth and go to Bluetooth preferences.
Step 5: Select "Audioengine B2" to pair and connect. The Pair indicator on the B2 rear panel should be solid.
Step 6: Play your music and adjust volume levels on B2 and your device.
Repeat steps 3 thru 6 to add additional devices. B2 can connect only one device at a time, however it will remember up to six devices.
To disconnect B2 from a paired device and put B2 back into pair mode, press and hold the Pair button on the B2 rear panel until the indicator begins flashing.
For the full setup guide, download the attached PDF:
B2 quickstart guide