512 Quick Setup

Power ON/OFF
To turn on your 512, press and hold the power button on the top panel for about 3 seconds, then release the button.
The power button will light up and a sound will indicate that the speaker is on.

Wireless Connection
After charging the 512 battery, turn on the power.
Press and hold the Bluetooth button on the 512 top panel until a voice says "pairing". The Bluetooth button will flash indicating the speakers are in pairing mode.
On your phone, tablet, or computer, go to Bluetooth settings and turn on Bluetooth.
Select the 512 from the Bluetooth device list to connect. Your 512 will say "connected".
When your 512 is paired and connected, the indicator on the Bluetooth button will glow solid Blue.

To put the 512 back into pairing mode and disconnect from a device press and hold the Bluetooth button on th 512 top panel until the indicator begins flashing.

Aux Input
Usethe512 audio input to connect non-Bluetooth devices by connecting any 3.5mm mini-jack audio cable from your device's audio output (headphone jack, etc.) to the "AUX" input jack on the side of the 512.
Press the AUX button on the 512 top panel if it is not already illuminated.

Volume
To Adjust the volume of the 512, use your device or press the volume up "+" and volume down "-" buttons on the top of the 512.

Play/Pause
To pause playback, or resume playback of a paused song, use your device or press the Play/Pause "►❙❙" button on the top of the 512.

Battery Charging
When the 512 needs charging, the power button will flash red and a low battery chime will play. Recharge the 512 via the micro USB port using the included cable and any 5V USB phone/tablet charger or the USB port on your computer. A full charge takes about 3 1/2 hours but you can continue to play music while the 512 is charging.

With a fully charged battery, you'll get up to 12 hours of use at typical listening levels.